Re: why won't it stall good?

Posted by Hugh MacKay on March 26, 2003 at 02:18:57 from (216.208.58.121):

In Reply to: why won't it stall good? posted by Bryce Andreasen (Magnum) on March 25, 2003 at 19:34:03:

Bryce: Your timing advance is off just a wee bit. The other item that is a must with these old Farmalls is let them idle a minute or so to cool a bit. I would try that first, when you have been working tractor, just pull up let it idle for a bit, before turning off ignition. While the timing advance may cure the problem, it does give a bit of an edge on power, right where it is set. My Farmall Super A does this, and the longer and harder it has been running the worse it is. I am very reluctant to change timing advance, as the tractor is truly super on performance. I always set timing by ear and never use light.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: why won't it stall good? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]