farmall H distributor or magneto shaft seal

Posted by Scott in MO on March 19, 2003 at 17:29:17 from (198.70.13.134):

My question is when tearing in to my H magneto housing I found I had a grove where the seal rides. In order to fix this i need to know where to get a seal kit to restore the shaft at a reasonable cost. Another alernative may be to change the shaft. When i looked in my IH parts manual it showed two shaft numbers 45001- d which it looks like to me it takes a smaller seal. The other shaft number is 352079-r91 which takes a bigger seal. I have the 352079-r91 shaft and i also have the 4500-d shaft . My question is how is the seal different i know there is a serial number break. THANKS ANY HELP .Also the housing numbers are the same 6387-D but the seal end is made alittle different in the houing.

Follow Ups:

• Re: farmall H distributor or magneto shaft seal Theman 06:13:52 03/21/03 (0)

Post A Followup Name: E-Mail: Subject: Re: farmall H distributor or magneto shaft seal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]