Re: 350 T/A overhaul

Posted by Red Rider on March 16, 2003 at 19:29:48 from (66.248.98.135):

In Reply to: 350 T/A overhaul posted by ryan on March 16, 2003 at 16:22:44:

Dan, I completed this overhaul on 3 IH tractors. 300 Farmall, 300 Utility and a 400 Farmall Diesel. The way I looked at It, I didn't want to do this again so I went with the sprague type over run clutch, new clutch, pressure plate and throw out bearing for both TA and main clutch plus new pilot bearing. I also replace all the seals with new ones. Its really not that difficult just time consuming. It cost me about $900 per tractor.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 350 T/A overhaul Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]