Int 350-C175 Pistons

Posted by Dave on March 14, 2003 at 21:20:00 from (172.143.115.194):

I recently rebuilt my 350 utility engine. It has a c-169 block, but everything in it was 175 size (Sleeves, pistons, wrist pins, etc.). My question is this. The pistons I took out of it were in bad shape, both out of round and the ring grooves were chipped. But the top of the pistons were not flat. They had a high rise shelf more or less (not really a crater). The new pistons that came with my sleeve kit were flat. Do these type pistons reduce the HP due to less compression?? The old pistons did have the bushings in them for the smaller wrist pins. New pistons I didn't need the bushings.

Follow Ups:

• Re: Int 350-C175 Pistons Red Rider 19:30:18 03/15/03 (0)
• Re: Int 350-C175 Pistons randy hall 14:15:40 03/15/03 (0)
• Re: Int 350-C175 Pistons E J 08:57:49 03/15/03 (0)
• Re: Int 350-C175 Pistons Jim 04:05:55 03/15/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Int 350-C175 Pistons Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]