Re: Re: IH 560 Hyd. problem

Posted by butch1cow on March 14, 2003 at 20:57:28 from (162.39.36.155):

In Reply to: Re: IH 560 Hyd. problem posted by RPM on March 14, 2003 at 07:34:23:

It has factory power steering. One of the small lines goes to the hyd. manifold under the batt. box[return line], and the other goes to the pump cover held on with 2 5/16 bolts, o ring seal,[presure line]. there is 1 pump held to the inside of the cover with 4 bolts and supplys both power st. and the hyd.line [3/4 in.] to thr hyd. manifold under thr batt. box. This pump has no presure relief valve. [this pump is shown in the IH parts book] Without presure regulation somewhere in thr system, the pump circulates oil thru the 3/4 in. line and back to the trans. case. Presure reg. was in the hydra valves that I think have been removed at some point in the past. To solve the problem, I think I need to install a presure reg. in thr 3/4 in. line under the batt. box. This may be a 560 Industrial.

Follow Ups:

• Re: Re: Re: IH 560 Hyd. problem 35 A 21:04:33 03/14/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: IH 560 Hyd. problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]