Re: 3 point hitch lift-all

Posted by BlueLite on March 09, 2003 at 18:08:40 from (206.172.124.59):

In Reply to: 3 point hitch lift-all posted by dave(ne) on March 08, 2003 at 19:08:14:

You can make your own. Cylinder,single spool,bypass valve,belt pulley pump,4000lb flex line,etc wouldn't cost you much. You can even decide to go 2 way pressure. You can make a frame for your lift arms, and like I did, made the arms, adjustable from 27 to 36in. I made the whole unit for my MH30 pull tractor and worked fine. Just be sure your top link attach point is in vertical alignment with your lift arms attach point.

They even have PTO pumps if you want to save the hassle of installing a double pulley on your water pump.

Follow Ups:

• Re: Re: 3 point hitch lift-all Brent 10:39:26 03/10/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 3 point hitch lift-all Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]