Re: Converting '41-H to 12 volts

Posted by steve on March 08, 2003 at 18:25:48 from (204.246.222.155):

In Reply to: Converting '41-H to 12 volts posted by Hollerback on March 07, 2003 at 22:29:36:

charge the battery full charge with a portable charger. then see if it cranks o.k. can you jump it with another battery?? if so, then the starter is not the problem. make sure all the starter cable and battery terminals are cleaned with a wire brush and reinstalled for good connections. you need to know it the battery is weak or the starter is poor. a 6 volt starter is fine, negative ground is fine. the generator has two terminals "F" and "A".
--after it is running, ground the "F" terminal to the tractor frame with a jumper wire. connect a volt meter across the A and F terminals and see what the voltage is. if you get 13.5 volts or so, maybe your voltage regulator is bad?

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Converting '41-H to 12 volts Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]