|
Farmall & IHC Tractors Discussion Board |
Farmall BN cost
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RoX on February 27, 2003 at 06:36:45 from (63.147.7.141):
Hi All, I was wondering if anyone could help me out here with how much to offer a gentlemen for a BN. I didn't check the serial and casting tags because I don't really know where they are???? I'm guessing the tractor is a pretty early model as It didn't come with a starter and is crank only. He told me you can put a starter in it though? The tractor has been outside for about 2 years. The sheet metal isn't in terrible shape but it does have a good bit of surface rust and such. Not something that pretty to look at anyway. Has a standard drawbar and PTO on it. The exhaust was covered with a tin can. He says he has the radiator drained and he has oil poured into the spark plug holes for winter then replaced the plugs. One thing that is kinda weird is that the previous owner put on pneumatic crane tires for the rears. The kind of tires that are solid inside. VERY HARD and rough. The hubs were tack welded onto these other tires. He says they are still good and the bolt holes appear ok but I would definatly want to get rid of them anyway. He said they really work terrible for using the tractor in regard to traction anyway. SO I am wondering how easily you can get hubs (centers) and rims for these machines also? He said he has the original rims if he can find them but they are rotted out due to calcium anyway. SO judging what I'm gonna have to put back into this machine for new rear wheels and based on the fact that he didn't prove to me it ran or was loose what would you say it is maybe worth? Once again if you guys give me the location of the serial numbers I can Maybe go take a second look and get back to you with them to see if they match up correctly or not. Thanks for all the help.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Nuffield Tractor: Conclusion - by Anthony West. In the last piece I mentioned that Nuffield had reached the stage where they had chosen to drop the "Universal" from production. The two new models were given three figure numbers, instead of "three" and "four". Model numbers were introduced to help farmers and dealers instantly recognize the engine size and horsepower of the tractor, the 4/60 had a four cylinder diesel engine which developed 60 bhp at 2,000 rpm. The 3/42 had a 3 cylinder diesel engine which produced 42 bhp at 2,000 rpm. Th
... [Read Article]
Latest Ad:
1952John Deere MT tractor
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|