Re: stuck head on H

Posted by Phil Auten (TX) on February 22, 2003 at 10:27:34 from (64.152.232.237):

In Reply to: stuck head on H posted by Dick on February 22, 2003 at 10:14:27:

I would use a chisel instead of a putty knife. There's more leverage applied to move the head away from the block that way. This is pretty much a normal situation when removing the head from any engine. I've had to pry the head off of lawnmower engines to get the gasket to turn loose.

Phil

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: stuck head on H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]