|
Farmall & IHC Tractors Discussion Board |
1936 Farmall F-20 help and info
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Chuck on February 21, 2003 at 06:43:37 from (207.177.68.9):
I recently got and F-20 given to me. The engine was stuck, i was sitting for 30 some years, anyways i got it all ready to sandblast and the motor tore apart(finaly) but i was wondering where i can get a new engine kit for it...?? also what were the options on a late 1936 f-20 it is red, i have the steering brakes, brake pedals, and on the right side of the tractor by the brake pedals there is a lever that activates the right brake only, it has a pto extension and the gas tank with the little one for the gasoline, it doesnt have a belt pulley or road gear is there any other options or were most of the ones that i have standard for it?? any help of info would be great!!!
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Engine Basics: Spark Plug Cleaning - by Staff. Cleaning procedures: Brush or blow dirt from around the spark plug base. Remove the plug with a correctly fitted wrench. Examine the porcelain insulator and points. If the insulator appears to be melted or blistered, cracked or broken, and the points seem unduly burned it is evident that the plug is operating too hot and it should be replaced with a colder plug. If the plug is fouled excessively with carbon it apparently is operating too cold and it should be replac
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|