Farmall & IHC Tractors Discussion Board |
Re: Farmall M Lift-All Pump
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by gene b on February 17, 2003 at 03:01:50 from (65.230.144.18):
In Reply to: Farmall M Lift-All Pump posted by Daniel T. Maxey on February 16, 2003 at 20:04:57:
You can use the front port on the left side go thru your two way valve and back to the fill port. You will have to pull the lever that is on the lite bkt back and fasten it so it will stay back for the system to work. If you are using two lift cycls you should be able to lift anything you need to as you will have full two way action. Remember that the belly pump only works when the clutch is enguaged no big deal once you get on to it as we used these systems for years and got along fine.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|