Re: IH Farmall 354, 364, 404, 424 444

Posted by Chet Glenn on February 07, 2003 at 06:37:42 from (66.137.173.92):

In Reply to: IH Farmall 354, 364, 404, 424 444 posted by Jimbob on February 06, 2003 at 21:35:00:

I also have a 404 and don't see too many of them around. I did see one down the road at Brinkley's big auction in Idabel OK a few months ago. I have never laid eyes on the other model numbers you mentioned. I love the tractor for its maneuverability, but it did not have a factory 3pt, so i had to rig one up with a hydraulic cylinder off the back remotes. The hyd pump does not have the oomph to lift real heavy stuff, but does ok with a box blade. The feloader also does not get enough oomph to work heavy loads right , but does ok for what I need. The only trouble I have and still have is the pilot bushing in the flywheel. It has worn out three times and I even had the shaft out and straightened, hoping to keep from wearing out the last one, no luck. Also cannot run a square bailer, no live PTO or two range gear selection! I have been thinking about selling it and getting a new Mahindra (at least it is red) or a Landtrac( gotta love a purple tractor), Farmall God forgive me, but I would never part with my Super C!!!!! Chet

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH Farmall 354, 364, 404, 424 444 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]