Re: 6v generator to 12v generator

Posted by Dave on January 23, 2003 at 14:31:19 from (138.29.36.228):

In Reply to: 6v generator to 12v generator posted by JohnG(TX) on January 23, 2003 at 12:15:48:

You can get a 12-volt cutout, or remove the relay from a 6 volt regulator and replace it with diodes. I now run my 41 A this way with a 12 volt battery and bulbs but the same 6-volt gen. It does charge at a slower rate, and won't begin charging until I am at about half throttle (below that it turns too low and won't make enough voltage to charge a 12-volt battery). I have heard of some people using a smaller generator pulley to make it spin faster to overcome this problem.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 6v generator to 12v generator Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]