Re: Re: H overhaul - what piston/sleeves can I use?

Posted by The Red on January 20, 2003 at 08:35:32 from (12.84.239.142):

In Reply to: Re: H overhaul - what piston/sleeves can I use? posted by Norm on January 20, 2003 at 07:36:37:

Norm I would not bore the block. the cylinder walls on the Hs are very thin. It's too easy to bore into a water jacket. The 42 H I parted out last year had a break in #1 cylinder wall. That wall was probably no thicker than 1/16".

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: H overhaul - what piston/sleeves can I use? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]