Re: M Farmall Govner is leaking

Posted by Gordon {Tx} on January 09, 2003 at 07:44:50 from (65.197.75.39):

In Reply to: M Farmall Govner is leaking posted by Robert in NC on January 09, 2003 at 07:34:11:

Robert, where is it leaking? Out of the side cover? If so I'd try one of the silicone type gasket ina tube. When using any of these gasket makers, it is very important to have both sufaces squeaky clean. Use some brake cleaner or something similar. Then apply the gasket maker to one side of the surface & follow the directions for it. Allow the alotted time for it to "skin over" Then reassemble. When tightening, be careful not tight it so tight as to squeeze all the gasket maker out. I hope this helps & if this is not what your problem is, I apologize in advance. Have fun ...Gordon

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M Farmall Govner is leaking Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]