Re: M head gasket

Posted by Steven@nd on January 08, 2003 at 19:05:08 from (12.15.56.120):

In Reply to: M head gasket posted by mike on January 08, 2003 at 18:51:12:

This is just my personal opinion, but I think the block heater will warm it up plenty. I would put the head on, torque it down, plug the tractor in overnight and retorque in the morning. If you really want to be precise, let it cool down during the day and plug it in again the next night and retorque again.

I have a 1500 watt heater on my H and it gets the coolant warmer than the engine does normally! The only time the temp gauge goes as high is under a heavy load on a hot day. So I really think the heater should be enough.

PS - Thanks for the idea, I think I'll use that one next time!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M head gasket Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]