Re: FFA tractor restoration on TD9 dozer

Posted by Milton on December 30, 2002 at 07:42:31 from (216.135.39.196):

In Reply to: FFA tractor restoration on TD9 dozer posted by Preston on December 29, 2002 at 16:19:22:

Hello Preston, --- 30 / Dec. / 2002 ---

The motor SERIAL NUMBER is on a raised area (1/4 in) and is 3/4 in by 2 or 3 inches long - machine smooth area and has a SERIAL NUMBER which is machine stamped on it. The PREFIX letters should be "TDCBM". The grease and paint would have to be removed to read this. This is on the block, usualy up front right side of motor / but could be anywhere / right side - left side / but is on the block. Use paint remover to remove the paint. What ever the Prefix letters are / give that and the SERIAL NUMBER - OK?

Regards, Milton

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: FFA tractor restoration on TD9 dozer Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]