Re: 1944 M Hood

Posted by Farmer Bob on December 22, 2002 at 20:51:28 from (66.152.73.62):

In Reply to: 1944 M Hood posted by Brad Kimball on December 22, 2002 at 18:38:55:

Brad, Bill below has given you a very complete description of the hood fitting and placement. The gauges are inset away from the holes in the hood to mimimize the vibration and consequent wear on the underside of the hood. There should also be a stub bolt sticking up from the gauge bracket that goes through the hood. There was a rubber washer then a formed (To the contour of the hood) metal washer and a wing nut that held the top of the hood in place. The M's had this bolt, the H's didn't.//FB

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 1944 M Hood Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]