Re: Re: Re: Re: International 1086 - information about TA

Posted by the tractor vet on December 08, 2002 at 16:58:21 from (216.196.13.118):

In Reply to: Re: Re: Re: International 1086 - information about TA posted by pcy on December 08, 2002 at 10:10:17:

When i took out the shaft and the other junk it went to be a Toyota or Honda , and even if ya did tweek it to 300 ponys it would take it if ya set the reg.pressure up but if ya get over 450 then it will slip not enough clutch's in there and if ya try to set up the pressure up above 350 lbs then it will blow the mcv off the side even with going to 3/8 grade eight bolts.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Re: International 1086 - information about TA Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]