Re: Engine block on Super A

Posted by Stan(VA). on November 28, 2002 at 14:54:02 from (208.59.157.241):

In Reply to: Engine block on Super A posted by Sharky on November 26, 2002 at 12:30:13:

The info you're getting is pretty good; the C113 was 251069, the C123 was 354898. The 366204 was the factory replacement block listed in my parts book that would have been current through the 60's. ie: That is a dealer replacement block that you've got. The only important thing is to find what size sleeves it takes. Pull a sleeve out and measure at the lower o-ring sealing surface. 3 5/16" is the smaller C-113 sleeves, 3 7/16" is for the C-123. The C-113 came with a 3" bore piston and you can now get a 3 1/8" overbore with a thinner sleeve. The C-123 came with a 3 1/8" piston and you can now get a 3 1/4" overbore with the thinner sleeve.
Stan(VA).

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Engine block on Super A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]