Re: Farmall 300 manifold on a H, What carburator to use?

Posted by Stan(VA). on November 27, 2002 at 06:17:04 from (216.164.240.99):

In Reply to: Farmall 300 manifold on a H, What carburator to use? posted by Zonie on November 26, 2002 at 18:53:58:

My I&T manual shows the H used a model D-10 carb, the Super H (and the M) used a model E-12 carb. I checked my 300 I&T manual only to find it's missing about 20 pages in the middle of the manual :( :( (always thought it was a little thinner than the other) which of course have the carb info.
So my wild guess would be that you could use the M carb but assume the jetting would change. A walk through the parts manuals should confirm that. This is an interesting question, so please post back any differences you run into. I have a IH parts CD and a seperate parts book for the Super H so ask if you need me to look up any of the numbers that way. I doubt they will give us jet sizes but at least tell us if the jets are different between the models.
Stan(VA).

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 300 manifold on a H, What carburator to use? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]