long winded plow problem for an A

Posted by Kurow on November 27, 2002 at 00:23:23 from (203.96.208.20):

Please bare with me. I have purchased what i can make from the decals an A-193 plow which is of the same design but slightly bigger and more industrial than the same thing for a Cub. So i was hoping it would fit onto my A. The only other A plow i have seen had a different mounting system in the front. I presume that this one mounts in a similar fashion to the cub by reversing the drawbar and having a strong arm lift arrangement at the rear.

So here is the tricky part. I am down in New Zealand and there are few of them so i am wanting to get in touch with or see photos of one set up. The plow is complete apart from lifting gear. I have a couple of levers that might work. Thanks for your help :)

Stephen
44A, 47Cub, 47BN, 48AV, 52SuperA and B in bits.

Follow Ups:

• Re: long winded plow problem for an A Dave, Sherburne, NY 18:13:43 11/27/02 (0)

Post A Followup Name: E-Mail: Subject: Re: long winded plow problem for an A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]