Re: Building a blade for a Super A

Posted by Hugh MacKay on November 20, 2002 at 01:45:52 from (216.208.58.127):

In Reply to: Building a blade for a Super A posted by marvin on November 19, 2002 at 11:48:40:

marvin: The centre mount blade that CD has on 130 is the same blade, push arms and angle mechanizm as the front blade. Just the mounting hardware is different. It mounts to a cross member between final drives. It could give you some good ideas on reinforcement.

If I were to build another blade, I would go with that principle then you could use either centre or out front All you would need is a frame to put in place between mount at rear and suspended at front for using blade on front.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Building a blade for a Super A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]