Re: How hard is it to unstick a Farmall H?

Posted by Paul. on November 08, 2002 at 05:39:39 from (206.18.211.3):

In Reply to: How hard is it to unstick a Farmall H? posted by Sean Brinston on November 07, 2002 at 21:34:35:

I have taken the spark plugs out and filled the cylinders with Kroil. If you are not in a hurry, fill the cylinders up, and put the spark plugs back in (loosly). Let it sit a week or so, and fill the cylinders up again. Usually, the stuck pistons are the ones that take the least solvent, since the free pistons will typically let the solvent seep past them. If push comes to shove, you can cut a block of wood from a 2x4 or 2x6 and put it on the top of that piston and tap (NOT pound) on it with a heavy hammer. Sometimes that works, sometimes it doesn't.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How hard is it to unstick a Farmall H? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]