Farmall & IHC Tractors Discussion Board |
Re: Beginner on M's
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on November 03, 2002 at 08:32:27 from (216.208.58.111):
In Reply to: Beginner on M's posted by NJWilliams on November 02, 2002 at 21:27:56:
Looks like you are in some pretty good hands here. I know Mike S personally, have seen his M, I think he told me his dad bought it new. It didn't pull so well the day his heifers chewed the plug wires. Heifers didn't look hungry either. On the 3 point hitch, I would advise you give it some thought, before ordering. Rear hitches did not work the best on these old American row crops. Be it 3 point or fast hitch, until the operator platform was moved ahead on these old row crops to give the same configuration as the Ford or Ferguson. Most implements will not raise high enough without hitting seat. Secondly you don't have automatic draft and depth controll. Having farmed and used later model Farmalls with 3 point hitch and draft and depth controll, I really cant see much use for these add on 3 point hitches. You could probably buy a 3 furrow trailer plow, a wheel cultivator and a wheel controlled disc for less money than the hitch. Didn't see a 3 point on Mike's tractor. I was planting corn one day 560 and fast hitch mounted 4 row corn planter. Because of seat placement corn planter used to bump seat when raised. Was just always to damn close for comfort. On the move in 3rd gear, lowered the corn planter only to have lever for row markers hook in my hip pocket. Corn planter took me and seat with it as it lowered. I could get my foot to clutch, but not hands on hydraulic levers. It was not a very pleasant experience and luckily scrapes and bruises were my worst injuries.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|