Farmall & IHC Tractors Discussion Board |
Re: Need info on F-20 for hauling
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave on October 19, 2002 at 13:10:08 from (216.42.66.121):
In Reply to: Need info on F-20 for hauling posted by CD on October 19, 2002 at 10:27:30:
Rear wheel width depends on regular or narrow tread configuration,and what size-type wheels are on them.Example--a narrow tread tractor with 36" wheels mounted "in" over the brake covers is about 6&1/2 ft. wide,regular tread tractor with steel,24" or 28" wheels will be about 8 ft. wide.Cut-off wheels can also add variables to the mix.You shouldn't find anything much over 8 ft. wide.I believe tractor is less than 2 tons, and about 12 ft. long
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|