Re: worksaver

Posted by Haas on October 18, 2002 at 03:52:30 from (166.72.245.149):

In Reply to: worksaver posted by steve on October 17, 2002 at 19:51:42:

Get the Saginaw hitch. I don't think the Worksaver would work with a loader on the tractor. As Dave said, the Worksaver uses the touch control rockshafts to work the 3 point. That means bars go from the hitch at the back to the rockshafts in the front. Also the capacity is limited because the Touch control cylinders are not very large and they have a short stroke. You will only be able to lift around 600 lbs with the Worksaver 3 point on a C. At least that is my experience and I have measured the pressure my pump is putting out and it is around 1500 psi.

Follow Ups:

• Re: Re: worksaver REA 15:05:31 10/18/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: worksaver Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]