Re: Farmall wide front help

Posted by Red Rider on October 17, 2002 at 21:30:53 from (65.239.44.212):

In Reply to: Farmall wide front help posted by Tony on October 16, 2002 at 20:19:21:

Any wide front from M through 806 will fit your H. The only difference will be the stay rod ball socket support. The H is narrower than the M so the support will need to be for an H, 300/350. If you can't find one that part is very easy to make. Out here is Washington State they are pretty easy to find and If complete with hubs will run you around $750.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall wide front help Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]