Farmall & IHC Tractors Discussion Board |
Re: Re: Axel/Wheel key
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on October 14, 2002 at 12:48:27 from (64.228.12.22):
In Reply to: Re: Axel/Wheel key posted by randy hall on October 14, 2002 at 12:26:18:
The week my dad's 300 was new it sheared key in cast wheel. The IH dealer took the wheel and had a keyway cut in the cast wheel. They put that back together with a square key stock. It was around the farm for 32 years and 5 engine rebuilds. The tractor is still going strong. That is 47 years ago. New owner tells me he rebuilt engine again about 5 years ago. They can't be working it as hard as we used to. Engine needed a crank this time. If this is the case for OhioH a simple piece of key stock will fix. My dad's 300 is not the only tractor I have seen this on. I have seen a couple with both wheels with key stock, actually looked as though it may have been a factory job.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|