Re: Creeper gear for Super M

Posted by Haas on October 08, 2002 at 12:48:47 from (166.72.245.110):

In Reply to: Creeper gear for Super M posted by Wide Front SM Puller on October 08, 2002 at 09:02:52:

You will need more than just the one new gear. You will also need a new reverse idler gear, since first gear meshes with that, and also a new gear first and second gear for the counter shaft. My parts book for the M shows that the low low first gear is part of the counter shaft where in the regular set up, it is a double gear together with the second gear. I guess that was done because the low low gear is too small to fit on the counter shaft, so IH made it together with the shaft. Thus, you need a new counter shaft with the first gear on it, a new second gear, and a new reverse idler in addition to the sliding 1st gear. The change is not going to be easy or cheap.

Follow Ups:

• Re: Re: Creeper gear for Super M Wide Front SM Puller 15:23:10 10/08/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Creeper gear for Super M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]