f400 hyd seals--=still struggling with the pump

Posted by karl f on October 01, 2002 at 23:52:55 from (63.21.83.2):

i got the 400 pump to prime, but looks like i have to redo the job and be more thorough, as it is not even making enough pressure now to pop the control levers back to neutral! (it did fine before disassembly except for the seal leak)
the large O-ring is not available from cnh anymore! anyone have any shortcuts to find that?
also the front shaft was grooved and i want to smooth it out, but do not want to take off too much material. curious about using readi-sleeves or whatever the name of that product is. or maybe an undersized seal? i want to do a good job, but stay cheap, we're having some $ issues lately with the family and i can't stick all my part time pay into my dad's machinery.
-karl

Follow Ups:

• Re: f400 hyd seals--=still struggling with the pump the tractor vet 18:24:28 10/02/02 (0)
• Re: f400 hyd seals--=still struggling with the pump jmyt_47 11:13:59 10/02/02 (2)
  • Re: Re: f400 hyd seals--=still struggling with the pump karl f 11:23:14 10/02/02 (1)
    • Re: Re: Re: f400 hyd seals--=still struggling with the pump jmyt_47 14:48:07 10/02/02 (0)

Post A Followup Name: E-Mail: Subject: Re: f400 hyd seals--=still struggling with the pump Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]