Re: 560 leaking head gasket

Posted by AceS on September 30, 2002 at 10:15:39 from (67.0.37.65):

In Reply to: 560 leaking head gasket posted by dvtw on September 30, 2002 at 08:59:08:

The sleves on the older D282 have to be set with gage to make sure they don't set to high above the deck or the gasket will not hold. Don't remember seeing any one on the forum talking about that. There are shims to go under the sleve lip to adjust with all sleve should be set as close as posible. This could be the problem.

Follow Ups:

• Re: Re: 560 leaking head gasket dvtw 10:48:41 09/30/02 (1)
  • Re: Re: Re: 560 leaking head gasket AceS 12:34:07 09/30/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 560 leaking head gasket Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]