Re: New Exhaust pipe for A

Posted by Hugh MacKay on September 25, 2002 at 17:26:40 from (64.228.13.93):

In Reply to: New Exhaust pipe for A posted by EZ on September 24, 2002 at 16:45:15:

These muflers also concern me, some CaseIH dealers in Canada are selling these muflers with no baffles, inlet and outlet same size and one mufler for all C-113 and C-123 engines. The original A and SA muflers had a sizeable smaller outlet than inlet. I cant believe they create enough back presure on the C-113 engine. I can put one of these muflers on my Farmall 130 and it will burn the centre out of mufler in 2 years. I have seen several other C-123 engines same way. In two weeks , finish will come off the new mufler half way up on larger section.

They are doing same on H, M, 300, 400, 350 and 450 one mufler fits all. The larger tractor in each case is close to 100 cubic inches larger. Lets hear some engineering genius explain that.

Follow Ups:

• Re: Re: New Exhaust pipe for A EZ 19:07:13 09/25/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: New Exhaust pipe for A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]