Re: 300U 12 Volt Conversion

Posted by Bob M on September 22, 2002 at 08:26:00 from (24.169.120.138):

In Reply to: 300U 12 Volt Conversion posted by Bob Jr from MN on September 21, 2002 at 19:36:45:

Bob - You can install a diode in the line to the exiter (#1 terminal) connection. Use a diode rated at least 50 PRV and 1 amp or greater. I forget whether the diode's cathode or anode goes to alternator side. Try installing the diode one way - if the alternator doesn't work, simply reverse the diode connections.

Alternatively you can put an indicator lamp or a resistor in the line. A lamp rated at about 200 ma at 12 volts is good - like a auto instrument panel or side marker light bulb (#168, etc). Or use a resistor rated between 12 and 40 ohms.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 300U 12 Volt Conversion Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]