Re: need to install a TA

Posted by randy hall on September 21, 2002 at 20:27:29 from (208.231.151.45):

In Reply to: need to install a TA posted by ugly jim on September 21, 2002 at 14:48:28:

most dealers will have hy-capacity rebuilt units. they are superior to anything else out there. a heavy duty one is around $800 a new clutch ,pressure plate, bearing kit and pto drive gear will be several hundred more. it is no small job if you have never done it. you need to split the tractor in three pieces and the torque is the last thing to come out of the clutch housing.you better get an i.t. manual or a technical manual from your ih dealer and study it first, good luck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: need to install a TA Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]