Re: Stud bolts on planetary housing on Super A

Posted by Haas on September 14, 2002 at 06:25:58 from (166.72.245.33):

In Reply to: Stud bolts on planetary housing on Super A posted by Al R in Roch NY on September 14, 2002 at 05:12:02:

Screw two nuts onto the studs and jam them together tightly. Use plenty of penetrating oil like liguid wrench or PB blaster where the stud goes into the housing. A couple of these studs are in holes that go all the way through to the outside, use penetrant there too. Then put a wrench on the inside nut and try to break loose the stud. If it does not give, use a few hard blows on the wrench with a hammer. Should come right out.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Stud bolts on planetary housing on Super A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]