Re: IH 140 Gear Box Oil Level and pto seal replacement?

Posted by CNKS on September 03, 2002 at 18:43:51 from (207.178.96.211):

In Reply to: IH 140 Gear Box Oil Level and pto seal replacement? posted by Rick S on September 03, 2002 at 11:15:50:

Provided the 140 is the same as a Super A, for the belt pulley, remove the cap (retainer), then remove the seal and get a new gasket for the retainer. The seal on the pto shaft can be carefully pried out and replaced, if I remember correctly. Did both of these about 3-4 months ago with no problems. The "fill" hole on the belt pulley/pto housing is for inspection only, the unit is lubricated from the transmission.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH 140 Gear Box Oil Level and pto seal replacement? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]