Re: Farmall 400 hydraulic mess

Posted by jmyt_47 on August 28, 2002 at 07:37:52 from (170.92.1.104):

In Reply to: Farmall 400 hydraulic mess posted by Dana on August 27, 2002 at 19:45:52:

Souns like you have multiple problems. You may need to clean out the hydraulic system. I just rebuilt my 300's hydraulics. The most expensive part is the pump, the rest is pretty cheap(orings and internal components). It sounds to me like you have little or no oil in the system, or the loader is plumbed wrong to the tractor's hydraulics. Pull the side panel off the tractor. There are some extra plugs on the port block(hydraulic ouputs) located on the adjacent face. Otherwise, maybe one of you metal lines is leaking, which you could replace or fix by welding/brazing(of course I would advise removing it from the tractor first.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 400 hydraulic mess Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]