Re: Magneto timing

Posted by geoff gauger on August 27, 2002 at 05:40:18 from (12.155.240.196):

In Reply to: Magneto timing posted by Kurt Stappenbeck on August 25, 2002 at 22:55:00:

The rotor drive gears should have timing marks on them. The small rotor pinion gear on the end of the magneto shaft will have a punch mark on one of the teeth and the large gear that drives the rotor will (should) have two notches in the bakelite. R for right and L for left. Line up the R with the small gear's punch mark and follow the instructions for magneto timing.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Magneto timing Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]