|
Farmall & IHC Tractors Discussion Board |
Re: M w/loader
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by john d on August 23, 2002 at 14:14:59 from (157.91.115.103):
In Reply to: M w/loader posted by tlak on August 23, 2002 at 08:40:23:
Doesn't matter what you pay for it, someone will think you paid too much, and someone else will wish they'd seen it for sale ahead of you. In central IN, an M that runs will bring $600 to $2400 depending on condition, tires, degree of restoration, and location. The basic differences between the M and SM are: disk brakes on the SM (though a few M tractors came with the Lambert disk setup) faster 3rd and 4th gears on the SM, SM engine built at 264cid, M at 248, but most M overhauls moved them to 264cid, and most SM rebuilds were at 281cid. There are a few other subtle differences, such as the thickness of the drawbar, but that's the overall picture. Tough tractors, easy to work on, and lots of fun to work with. Since the one you're looking at has a loader, be aware that you may need new bearings one of these days in the front wheels and the steering gear.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Horsepower Defined - by Staff. Indicated Horsepower This represents the power developed in the enine cylinder as obtained from the pressure in the cylinders. This is pressure obtained from an indicator which shows cylinder pressures. Indicated horsepower does not represent the actual useful power delivered by the engine. Brake Horsepower This is the actual horse power delivered by the engine to the shaft. It is equal to the "indicated horsepower" less the friction of the engine. It is useful hor
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|