Re: Re: IH 314 Plow

Posted by Colorado Curt on August 05, 2002 at 19:37:17 from (12.253.101.171):

In Reply to: Re: IH 314 Plow posted by Hugh MacKay on August 05, 2002 at 16:41:14:

Thanks for the information. It is a model number 314 with 3-16" Super Chief High Speed bottoms. We call them spinner plows here, but it sounds like what you call a rollover. Both sets had left hand threads. I agree with you that one should be right and one should be left. I was taking them off with an impact wrench and getting no where. I thought I would try to break them loose by tightening them since they were rusted pretty bad and the nuts spun right off. To think I wasted all that WD40.

Follow Ups:

• Re: Re: Re: IH 314 Plow Hugh MacKay 20:11:09 08/05/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: IH 314 Plow Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]