|
Farmall & IHC Tractors Discussion Board |
Re: still wiring trouble on my H
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Phil Auten (Tx) on July 31, 2002 at 09:01:54 from (63.173.243.93):
In Reply to: still wiring trouble on my H posted by dave welsch on July 31, 2002 at 06:17:02:
Dave,
It sounds like there is a short in the light wiring to me. Try disconnecting the wiring to one side at a time to see if you can isolate the problem to one particular portion of the circuit.
Possibly there is a wire that has lost it's insulation and is touching the metal or maybe there is a wire pinched between two parts. Another possibility is an bad switch. Check everything over carefully and you will find the problem.
Just in case you find a really bad wiring harness, contact Jim Guarino at Agri-Services for new harnesses. Jim Guarino
Agri-Services
[email protected]
13899 North Road
Alden,NY 14004
716-937-6618 Phil
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
Latest Ad:
WANTED Front grille/nose assembly for Massey Ferguson 1160 (also fits 1180 & 1190). Headlight-mount section. AGCO Grille 3706022M91 (supersedes 3705942M91), cover 3705494M1/M2, holders 3705501M91/3711158M92. New/NOS/good used OK. Jonesboro, AR - will pay shipping. Photo appreciated. Thanks
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
