Re: Can I Put a M Widefront on any M

Posted by Hugh MacKay on July 27, 2002 at 18:45:08 from (209.226.106.62):

In Reply to: Can I Put a M Widefront on any M posted by 38G on July 27, 2002 at 13:37:47:

Any front end from an M should fit. Front end from SM, 400, 450, 560, etc will also fit. The newer front ends had tie rods behind axle and make a better set up. Easier to keep aligned, as they have ball and socket tie rods. Older front ends had pins and shackles. My dad ran into a problem once with an H narrow from factory. Some of the holes in tractor were not drilled. Was in frame rails where stabilizer bolts up.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Can I Put a M Widefront on any M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]