Re: Re: secotr gear and worm gear on M

Posted by John S. on July 26, 2002 at 08:32:48 from (172.156.131.231):

In Reply to: Re: secotr gear and worm gear on M posted by Andy Martin on July 25, 2002 at 20:45:45:

I was reading a few other posts in the archives and seen a lot of you had to pull your sector gear of the shaft. I can pull mine off with my fingers after I take the nut off. There is a washer under it. Why does mine not press down on my shaft? Is there any way to get rid of the slop in the upper part of the shaft between the shaft and the bushing? Thanks

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: secotr gear and worm gear on M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]