|
Farmall & IHC Tractors Discussion Board |
Re: Confusion about pushing snow with a blade
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by joe on June 24, 2002 at 11:07:17 from (66.43.207.226):
In Reply to: Confusion about pushing snow with a blade posted by Grampsold544 on June 24, 2002 at 05:26:32:
Going forward will work fine. I use a 300U in the winter, do not start going in reverse until the snow gets a few feet deep. On gravel, you will want to leave half an inch of snow or so in any case, unless you want to take a lot of gravel with you. And traction is a lot better (in the winter) on gravel with a bit of snow on it as compared to pavement with a bit of snow on it, in my opinion... the sharper edges of the limestone help your tires grip some. But anyways, like some others said, you'll want tire chains, wieghts, and a nice big blade.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
More Memories of a Field Service Engineer - by Brian Dye. Introduction: The author worked for one of the largest Ford tractor dealerships in England as a trouble-shooter on tractor engines, hydraulics and combine harvesters from 1963 to 1972. In 1972 he became a dealer manager and finally left the dealer net in 1975 to run his own electronic design and manufacturing company. [Editor] We live right in the middle of Norfolk. The dealership that I worked for sold Fordson Tractors from the 1920's and some of t
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|