Re: Confusion about pushing snow with a blade

Posted by JohnIH on June 24, 2002 at 06:59:29 from (208.169.39.37):

In Reply to: Confusion about pushing snow with a blade posted by Grampsold544 on June 24, 2002 at 05:26:32:

I usually start out pushing the snow in reverse, especially if it is deep or has a lot of drifts. I keep the blade at an angle so the snow moves to one side. Once the major snow is gone you can trim the edges by turning the blade around and going forward with the blade at an angle.

Blowers are great, but if you don't have cab the guy on the seat will end up looking like a snowman!

JohnIH

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Confusion about pushing snow with a blade Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]