H up an running

Posted by Mike ISW on June 21, 2002 at 10:50:20 from (64.12.104.39):

Filled her with gas and after about 4 revolutions she fired. What a great feeling! Months of work and $$$. To see and more appropiatly hear the fruits of your labor is fantastic! I wanted have her going by the round-up and I made it. Hope you all can make it to Penfield. I could use a couple suggestions though. Will a normal (12 volt) timing light work with my 6 volt system? Generator appears to be charging although I did not polarize. At half throttle it shows a slight discharge on low charge. On high charge I see about 5 amps charging. Normal or not? I rebuilt the carb and its at initial settings yet and running fine. Govoner control won't move all the way to high idle on the sawtooth plate. I'll need to read up and adjust accordingly. Gonna be hot here in WI this weekend. You'all have a good one,MIke

Follow Ups:

• Re: H up an running Dr. Evil 12:55:20 06/21/02 (0)
• Re: H up an running brianh 12:21:00 06/21/02 (0)

Post A Followup Name: E-Mail: Subject: Re: H up an running Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]