Re: M has no power under load

Posted by LanceM on June 17, 2002 at 15:18:27 from (216.241.130.249):

In Reply to: M has no power under load posted by Dave Westlund on June 17, 2002 at 04:17:21:

My guess is since you replaced the points and let's say it did pull a load well before, that the points aren't set to the right point for the timing. If the point gap is correctly set now I would check the timing. It could be the timing was set with the old points incorrectly adjusted gap wise. If they were real burnt and the new ones are too I would replace the condencer, you really should replace it anytime you replace the points as a bad one will burn the points or keep you from running at all.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M has no power under load Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]