|
Farmall & IHC Tractors Discussion Board |
284 IH trouble...
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Karl Bader on June 03, 2002 at 14:41:58 from (209.92.35.78):
Yeah this doesn't sound healthy at all, here is what happened... I was mowing the pasture when the engine itself started smoking, I immediately drove it back to the house, as I put it in high 3rd the engine starting making a slapping metal sort of sound, the smoke on the engine smelled like oil. I didn't get a red oil light or a yellow engine overheating light. I drove it up to the house, let it sit for awhile and checked the water level (fine) and the oil level (low but nothing too bad) I opened up the oil fill cap and the engine started smoking like crazy. I have no idea what to look for as wrong etc. This tractor is our everything tractor, and pretty much has had almost everything rebuilt or replaced on it, so junking it is not really an option nor in the budget, any suggestions as to what to look for would be greatly apreciated. Thanks, Karl
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Fabricating Sidesheets - by Chris Pratt. The easiest and best first-time project for wanna-be sheet-metal workers like myself is flat or nearly flat metal cut and drilled to be a tractor's sidesheet. A sidesheet is sheetmetal to cover either the engine as in the case of early Oliver's, Massey-Harris' and many crawlers or the wiring and electrical components as in the case of the Massey-Harris Pony, Allis Chalmers' D Series (D-14, D-15, D-12, D-10, D-17, and D-19). The need for fabricating becomes obvious when you go to buy any of these
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|