Re: Water in liftall pump

Posted by Haas on June 02, 2002 at 14:53:56 from (166.72.245.211):

In Reply to: Water in liftall pump posted by justwannano on June 02, 2002 at 11:17:30:

The drain for the lift all pump is on the bottom. Take the plug out and leave it for a day or two and drain out all the crud you can. Then fill it back up with oil ( you might want to use HyTran or tractor fluid because it absorbs moisture better than the recommended non detergent 30 wt). Then run it a while to circulate oil through all the parts. If you have cylinders connected, make sure they are all in the retracted position when you drain. Repeat this drain and refill until you get the water out, then refill with non detergent 30 wt oil. I would think it'll only take a couple of times to get the water purged out.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Water in liftall pump Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]